Happy Days

[Barney]

Exposure number eleven

Testing out the Crown Graphic
135 F 4.7 Optar
Fomapan 100 Ei 50 for 1/2 seconds @ F8 in 510 pyro

Happy Days

What's wrong here please?



100% Crop

 

[Nas]

What did you focus on? Did you use a loupe? Could be your ground glass isn’t calibrated to your film plane position but first you need to check whether the spot you focussed on is sharp on the neg. A mate of mine had this issue with his Linhof Master Tecnika ground glass. He tested by focussing on a ruler going away from the camera and had to use strips of film to shim it to the correct position.

 

[Barney]

I did not use a loupe due to the metal hood being in the way, I focused on the ground glass until I could see the writing above the doors become "crisp". I have looked all over the image at 100% and there isn't a spot anywhere where I could say "that bit is sharper"



I think I can see motion blur there, just pressed the button as cable was in the other camera box.

 

[Nas]

Ok. I think it’s a combo of shake and lack of critical focus. Loupe and cable release are essential for crisp shots. Either get a long loupe or unclip the hood for critical focus.

 

[Barney]

Ok. I think it’s a combo of shake and lack of critical focus. Loupe and cable release are essential for crisp shots. Either get a long loupe or unclip the hood for critical focus.

Having the hood is really handy, I like that feature. I will explore the long loupe suggestion. I also wondered if calculating the minimum focus distance for each each F stop might help me.